OLLIER RETRACTOR 36MM X 30MM 22,5CM

OLLIER RETRACTOR • 36x30MM • 22.5 CM • CE CLASS I • ISO 13485:2016

Classic Broad-Blade Retractor for Stable Soft Tissue Retraction in Orthopedics and Traumatology

The OLLIER Retractor 36x30mm, 22.5 cm is a Class I medical device according to ISO 13485:2016. This flat, wide retractor with its characteristic rectangular shape is a proven standard instrument for the secure and stable retraction of soft tissue during orthopedic and trauma procedures, particularly on the extremities.

Product Highlights:

✔ Certified according to ISO 13485:2016
✔ CE marking Class I (Regulation (EU) 2017/745)
✔ Classic OLLIER design with flat, broad blade
✔ Large-area blade (36x30 mm) for broad and gentle tissue retraction
✔ High-grade stainless steel 1.4401/316L – corrosion-resistant and biocompatible
✔ Biocompatibility tested according to ISO 10993
✔ Rounded, blunt edges for atraumatic application
✔ Optimal length of 22.5 cm for good leverage and deep access
✔ Autoclavable and reusable

Advantages of the OLLIER Retractor:

• Broad-Area and Gentle Retraction: The large, flat blade (36 mm wide, 30 mm high) distributes pressure evenly on the tissue, minimizing the risk of local pressure damage or tissue tears.
• Stable Exposure: Provides reliable and controlled holding back of muscles, fascia, and skin flaps for an optimal view of bony structures and joints.
• Ideal for Extremity Surgery: Specifically designed for procedures on the hip, knee, shoulder, and other large joints, as well as for the treatment of fractures in long bones.
• Versatile Application: Suitable for both retraction of superficial soft tissues and deeper tissue layers.
• Ergonomic Handling: The length and shape allow for good leverage while maintaining good control by the surgeon.

Technical Specifications:

• Model: OLLIER Retractor
• Type: Broad-Blade Retractor (flat, rectangular blade)
• Blade Dimensions: Approx. 36 mm (width) x 30 mm (height)
• Total Length: 22.5 cm
• Blade Shape: Flat, rectangular or slightly curved blade with rounded corners and edges
• Material: Surgical Stainless Steel 1.4401 / 316L
• Surface: High-gloss polished
• Processing: Autoklavable up to 135°C, suitable for repeated reprocessing
• Special Feature: Proven standard instrument for orthopedic and trauma surgery
• Risk Class: I according to Regulation (EU) 2017/745 (MDR)

Fields of Application:

• Orthopedic surgery (hip and knee arthroplasty, revision surgery)
• Traumatology (osteosynthesis of femur, tibia, humerus)
• Shoulder surgery
• Foot surgery (e.g., for ankle joint TAR prostheses or corrective osteotomies)
• General soft tissue retraction in orthopedic surgery

Important Application Notes:

• For use by surgical personnel.
• Atraumatic instrument with blunt edges. Nevertheless, measured force application is required to avoid tissue bruising.
• Inspect for cleanliness and structural integrity before each use. The blade should have no sharp edges or bends.
• The instrument is primarily for soft tissue retraction. Do not use as a lever on bony structures.
• Particularly suitable for stepwise retraction at different tissue depths during a procedure.
• During reprocessing, follow applicable guidelines for surgical stainless steel instruments.
• Discard if the blade is bent or damaged.